CONETAN Screed (en)

Conetan Screed

Conetan Screed films with screed on top are 1,5 – 2,0 mm thin and available up to 2,00 x 3,00 m in size, with a self weight of 2,5 – 3,5kg/m2
They are directly placed on leveled basis and glued on this by the same cementitious material.
They have high Mechanical Strength and are high temperature resisting and durable. They are used both in – and out door
They do not crack
Their placement is easy and fast
The final cost of finished floor, or wall is, considerably lower from that of traditional screed or wall mortar

Usage

For cement screeds from the beginning or on the existing floor on a horizontally stabilized base of concrete or existing flooring (regardless of flooring material).
No joints are required for any joints of the existing floor (the sheets due to their increased rigidity bridge the joints without falling back).
For cement screeds from the beginning or on the existing lining on a vertical stabilized surface regardless of material. No corrugation of any existing joints of the vertical surface is required because the CONETAN Screed stiffness allows the joint to be bridged without distortion.
As temporary floors that are placed in another location after temporary use.

Benefits

High quality and look
Variety of colors and texture
Extremely fast mounting speed
Adaptation to on-site geometry by simple standard workpiece tools
Reduced cost compared to the corresponding conventional flooring and investment.